Sloped and vaulted ceilings

Each room corner can have its own ceiling height. Use it for sloped roofs, vaulted ceilings, and shed roofs.

2 min readUpdated 2026-06-10

Step by step

1
Select the room
Click in an empty area inside the room. Inspector shows room properties.
2
Open Edit Ceiling Heights
Inspector → Edit Ceiling Heights. Each room corner gets a numeric height field.
3
Set heights per corner
Type a height for each corner. Adjacent corners with different heights produce slopes between them. Example — shed roof: Two corners at 8 feet, two corners at 12 feet. Ceiling slopes from low side to high side.
4
Verify in 3D
Switch to 3D View. The ceiling renders with the slope you specified.

Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

One-time purchase · No subscription · Web, iOS & Android